Led UV Printer – Ten Applications to Consider Whenever Obtaining a Led UV Printer.

Do you wish to put in a photo in your quilt that looked more like section of the fabric than an iron-on decal?

In past times, we relied on photo transfer paper to iron our photo onto our quilt block. Have you ever heard about direct-to-garment printing? It’s an incredible new method to get your best photo out of your scrapbook and onto your quilt block.

Direct-to-garment (DTG) printing is a kind of digital printing. With a value of about $20,000, it’s not practical to perform out and purchase your personal DTG printer. The typical price for coffee printer is $8 to $10.

This process might be a higher priced in comparison to the traditional photo transfer method. That’s partially for the reason that technology is so new. Should you do plan to try a DTG photo in your memory quilt block, there are a few factors to consider when deciding on the printer which will do the be right for you:

1. Be sure there are no chemicals required to pre-treat your fabric first. Some DTG printers create a graphic that may be more like screen printing. You don’t want that appear to be or feel in your quilt. The ink will probably be hard in addition to the material and can eventually (sometimes much sooner than later) will start to crack and wear with washings. Ask your prospective printer to view a sample of something they’ve printed. When you can feel the ink is raised above the surface in any way by any means, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.

2. Use a type of digital DTG printing available from the Brother GT 541. You can find no chemicals necessary to pre-treat the material. The inks bond using the natural fibers and are heat cured setting the picture. The inks are water based, that helps leave a soft yet crisp image on your own fabric.

There are a few downfalls to using led uv printer on your quilt blocks. One pitfall is color limitations. Since DTG printing can be a form an electronic printing, there is absolutely no white ink. White is the lack of color. Because of this you cannot print a photograph on dark blue or black fabric.

Digital garment or fabric printing is actually a CMYK format – cyan, magenta, yellow, and black. You are able to mix those colors to have a full spectrum of accurate colors – just not white. You can find DTG printers that print white ink, but the majority of those require chemical pre-treatments for the material and can give you that thick surface print.

You need to work with a light colored or neutral fabric and it must be cotton or a cotton blend. The fabric must have the ability to withstand 350 degrees for approximately half a minute. If you are not 09dexypky with 100 percent cotton or perhaps a 50/50 blend, ask your printer when the fabric work.

Size of your print can be a limitation. Most DTG printers use a printing field approximately 14 inches x 16 inches. For many quilters, that size range won’t be described as a problem.

And speaking of printing fields, here’s a hint. Most direct to dtg printer charge for a 14×16 surface. In case your blocks enables 2 or 3 photos to suit within that range, you could get every one of them printed for the cost of one. Seek advice from the printer to find out if it’s possible with the particular project.

Like the majority of technological advances, the buying price of digital garment (or fabric) printing probably will decrease as time passes. Maybe it is going to even be available on smaller printers for home and personal use. For the time being, see if you can look for a DTG printer for your upcoming photo quilt project. The outcomes will look like custom fabric, which is a great touch for your personal original quilt!